Please note: There is a setting in Pi-Star to enter your DMR-ID in order for your ID to come up you need one. It is free goto this website

Here’s what your Pi-Star page should look like:

 

Here’s what your Openspot2 page should look like to configure it for our YSF Server:

 

(Supply your own receive/transmit frequency and your Callsign/ID)

 

Here’s what your Openspot2 page should look like to configure it for our XLX Server:

 

(Supply your own receive/transmit frequency and your Callsign/ID. It is important to remember that your ‘TalkGroup must be set to either “6” or “4001” for your OpenSpot to know to send it to the “A Reflector” of the XLX Server)

Keep in mind that you MUST key your HT’s PTT button to transmit a signal through your hotspot before you will be able to hear the XLX connection.